Harley Ignition and Coil

Q: I have a 95 heritage. upgraded with a crane hi4 from Harley ignition and coil. I have been having trouble with the front cylinder cutting out. So far I have replaced the plug wires, spark, plugs, and finally the coil. I am still having the same issue. The engine starts up & runs for awhile, then the front cylinder cuts out. What would be the next step?
Kent M

A: It is possible that the ignition, itself, is no good. Contact Crane ‘s customer service. Ask if they can send you their test procedure for the ignition. Or, they may ask you to send the unit out to them. Crane is a good American company. They usually stand by their products.

Hogger Feedback:

Thanks guys. I discovered that the ignition system stopped putting the power out to the front cylinder after the engine warmed up. I decided to go ahead & change out the ignition with the newer Crane Hi 4 system. I have not finished the installation yet. I will let you know how it turns out. Thanks for the response! ( I tested it with a test light. A correctly firing ignition will show a strobe effect at the hook up to each side of the coil corresponding to each cylinder).

Related Videos:

Coil Install
Harley Davidson Ignition Coil Test
Discussion
  • (will not be published)

No Comments