Expert installation video on Harley lifter blocks. Bob LaRosa walks us step by step during the installation of the new gaskets, lifter blocks and bolts. When done make sure to place a piece of tape over the lifter blocks to avoid contamination.
Bob and Mark demonstrate the professional technique for finding the tight spot in a Sportster’s rear wheel belt. You should do this without a rider or passenger and with the bike in neutral. They teach you how to check for belt tension and deflection and how to retorque the axle so you can give your bike a smoother ride.Watch Now >>
Bob demonstrates the proper technique for checking, servicing and replacing Harley brakes on the rear wheel caliper of your Harley Sportster. He shows how to loosen the caliper, remove the brake pads and install a new set. Once they are in place, he pumps the rear brakes to make sure the caliper is making solid contact with the wheel and checks the fluid reservoir. If the fluid level is low, you should either bleed the brakes or replace the fluid. More Maintenance Videos are listed here.Watch Now >>
Follow along as Bob teaches you how to drain the fluids on your Harley Softail, including the primary, engine oil and the transmission drain plugs. You’ll also learn how to expertly reinstall the oil filter, and which parts must be replaced each time you service your motorcycle. Find your model here and do maintenance on your Harley.Watch Now >>
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike.Watch Now >>