Bob and Mark teach you how to custom install a Mikuni HSR42 carburetor kit and Wimmer air cleaner on a Touring model. Both components come assembled, so all you have to do is install. Bob shows you the best way to adjust the throttle and idle cables and install a stepless-style clamp on the fuel line. Once you think you’re finished, clean everything off with some parts cleaner and a towel. You worked hard on it, make it look good!
Update: July 2013 the City of Hollister marked the comeback of the Hollister Rally. Sounds like it went well and the Hollister City Council has signed a 10-year agreement to host the rally every July. Game on – Ride & Rock On. We have been to almost every Harley-Davidson rally in this great country and…Watch Now >>
Bob and Mark demonstrate the process for lubricating your Harley’s steering head bearings and adjusting the fall-away. As always, Bob stresses the importance of adequately prepping all bolts, consulting your user manual to be sure everything is done correctly, covering any painted areas on the bike and, if possible, working with two sets of hands.Watch Now >>
In order to service the fuel filter on your Sportster, you’ll need to drain the fuel tank. Bob demonstrates the best way to do this using a MityVac and a gasoline can. Once you follow his instructions and drain the fuel tank filter, cleaning any dirty parts and tightening any loose bolts, you can refill the tank with fuel and your bike should be good to go.Watch Now >>
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes…Watch Now >>