This how to install exhaust gasket video was shot in part to help REDUCE (it may not totally go away) popping on deceleration first make sure that you do not have any intake or exhaust leaks.When installing exhaust gaskets you want to make sure they do not bunch up. This can cause an exhaust leak or a restriction in exhaust flow.
Bob bleeds for us. Well, he bleeds the front brakes on this custom caliper set up. He notes the two bleeder set up and that we should remove old fluid before replacing with new. Check your manual DOT4 and DOT5 do not mix. They go pro with the use of a Brake Bleeder that pushes…Watch Now >>
Bob takes you through the step-by-step process for throttle cable service and adjustment, and air cleaner service or replacement. He discusses the different parts in the throttle system, their specific roles and how to clean and take care of them, then teaches you about the elements of the air cleaner.Watch Now >>
Bob and Mark demonstrate the best way to empty fork oil from your Sportster’s front fork sliders and replace it with new oil. It can be a two-man job, so try to complete the service with a friend. Newer bikes mostly use 39-millimeter forks, but most bikes are preset with varying levels of spring in the sliders, so consult your manual before you begin this service. Like any other service, you should clean all of the parts that you remove with parts cleaner to ensure that your bike operates smoothly between services.Watch Now >>
Now that you’ve fully serviced your Harley Sportster, you can take the opportunity to check all of the safety features on the bike. Make sure the lights are working properly, the horn makes noise, turn signals are operational, and all grommets are in place. Then you should check the throttle, add oil and fill the tires to the correct level. Once your finished with the service, get out and ride!
*****The service manual states you should follow your negation cable down from battery and remove nut that secures the connector to ground stud on the crankcase boss behind the starter motor assembly. You will need to do the reverse during installation.Watch Now >>