Harley forward controls are one of the most popular upgrades. When you get tired of the rust that builds on the stock controls here’s a nice upgrade. This is also a great upgrade for mid controls to Sportster forward controls. Bob and Mark take their time and remove the rusted stock brake lever side and replace it with new chrome.
Follow along as Bob teaches you how to drain the fluids on your Harley Softail, including the primary, engine oil and the transmission drain plugs. You’ll also learn how to expertly reinstall the oil filter, and which parts must be replaced each time you service your motorcycle. Find your model here and do maintenance on your Harley.Watch Now >>
Bob teaches you how to service the spark plugs on your Harley’s engine. Although you can clean and service your old spark plugs, Bob recommends just buying new ones because they are fairly inexpensive. You should purchase gapped, Harley-only spark plugs which usually come with a gap of 38-43,000th of an inch. After applying some anti-seize to the threads of the new plugs, you can thread them into the cylinder by hand and tighten them with a torque wrench and you’ll be good to go.Watch Now >>
In order to service the fuel filter on your Sportster, you’ll need to drain the fuel tank. Bob demonstrates the best way to do this using a MityVac and a gasoline can. Once you follow his instructions and drain the fuel tank filter, cleaning any dirty parts and tightening any loose bolts, you can refill the tank with fuel and your bike should be good to go.Watch Now >>
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike.Watch Now >>