Bob and Mark put a Dyna WideGlide on the table lift to show you how to assemble an HHI’s lower slider, fork tube and six-degree trees with hidden fork stops. They also teach you to use your service manual’s specifications to learn how to torque the parts after they assembled. Finally, be sure to apply anti-seize when necessary and use Spectro Heavy-Duty Fork Oil to fill the fork assembly. We produced a separate multi-hour video class on rebuilding a Springer Front End here.
Update: July 2013 the City of Hollister marked the comeback of the Hollister Rally. Sounds like it went well and the Hollister City Council has signed a 10-year agreement to host the rally every July. Game on – Ride & Rock On. We have been to almost every Harley-Davidson rally in this great country and…Watch Now >>
Bob and Mark demonstrate the professional technique for finding the tight spot in a Sportster’s rear wheel belt. You should do this without a rider or passenger and with the bike in neutral. They teach you how to check for belt tension and deflection and how to retorque the axle so you can give your bike a smoother ride.Watch Now >>
Bob demonstrates how to service the front and rear brake calipers on a Sportster. There are a few changes that Harley has made over the years, so you should be sure to pay attention to the differences; they could affect how you service your bike.Watch Now >>
When you’re adjusting the primary chain on your Sportster model, it’s always specified to adjust it in the tightest spot of its travel. Whether you use the hot or the cold measurement, Harley specifies that you do it in the tightest area. Bob teaches you a quick and simple method for locating the tightest spot in the path of the chain. He stresses that any time you are servicing inside the primary you should always unhook the negative cable.Watch Now >>