Bob demonstrates the best way to lubricate and adjust the throttle cable on your Harley Touring model. He likes to use Loctite throttle cable lubricant on the inner piece of the cable. He also shows you how to remove and reinstall the air cleaner. Once you are done with the service, check your throttle to be sure it is adjusted correctly.
Bob and Mark put an older Sportster up on the lift to show you how to service the front and rear brake calipers. They teach you which parts to remove, clean and replace, and discuss the components of the single piston-style caliper assembly and how they work.Watch Now >>
Bob and Mark teach you how to properly service important parts on your bike, including draining and replenishing the fluids, adjusting the clutch and the primary chain, inspecting the clutch cable and servicing the kickstand. They pinpoint a few problems to look for when servicing each of the parts, and give you some tips on how to deal with any of these possible problems. They also stress the importance of paying particular attention when removing and re-installing parts.Watch Now >>
Harley tools are not only specialty tools like JIMS and Kent Moore but many that you have in your garage already. Bob LaRosa gives us a great overview on some of the basic tools we need to service our Harley-Davidson from oil-change to custom part install. Bob shows us that tools are only part of…Watch Now >>
Bob and Mark demonstrate the best way to empty fork oil from your Sportster’s front fork sliders and replace it with new oil. It can be a two-man job, so try to complete the service with a friend. Newer bikes mostly use 39-millimeter forks, but most bikes are preset with varying levels of spring in the sliders, so consult your manual before you begin this service. Like any other service, you should clean all of the parts that you remove with parts cleaner to ensure that your bike operates smoothly between services.Watch Now >>