• 5:25

    M8 Adjustable Rocker Arms

    Mike brings our attention to adjustable rocker arms for the M8. A topic that will become increasingly more common for Milwaukee Eight owners who establish fifty thousand miles and higher. Harley’s four valve head has two rocker arms that control two valves each. One rocker arm controls a pair of intake valves and one arm…

    Watch Now >>
  • 20:49

    Harley Davidson Motor Review – Shovel to M8

    The Harley Davidson motor has gone through a lot of changes over the years. From the Knucklehead and Panhead, the Shovelhead and Evolution, and more recently, the Twin Cam and Milwaukee Eight. In this video, Mike talks about the Halrey Davidson motor from the inception of the Shovelhead motor in 1966 and demonstrates some of…

    Watch Now >>
  • 4:16

    Harley Monoshock Adjustment

    One adjustment that often gets overlooked is the Harley monoshock adjustment on M8 Softail models. Harley Davidson Softail models were completely redesigned and there are many obvious visual differences but possibly the most notable are the new M8 motor and a completely different style chassis. Softail models have always had two shocks located at the…

    Watch Now >>
  • 4:32

    M8 Harley Davidson Accessory Power Outlet

    Harley Davidson is keeping up with the changing times as well as the most current technology. Mike demonstrates for us on this M8 Softail where to find the Harley Davidson accessory power outlet. Harley’s change over to a CAN BUS electrical system has changed the way we are able to, or rather not able to,…

    Watch Now >>
  • 4:32

    Harley Twin Cam Oil Pressure Relief Valve

    Here is a great tech tip that Mike demonstrates for any members that are working in their Twin Cam, cam compartment. It is always a good habit to remove, clean, and inspect the Twin Cam oil pressure relief valve any time a cam plate is removed. Especially, if there had previously been some type of…

    Watch Now >>
  • 7:40

    What is the Best Cam for M8 114 or 107

    What’s the best cam for M8 114, 107, or 117? Our friend Mike Roen is getting prepared to take us, step by step, through the process of a S&S performance cam upgrade on this M8 Softail. Whether your bike has a 107, 114, or 117 cui motor, this procedure pertains to all M8 Harley Davidson…

    Watch Now >>
  • 15:47

    How to Remove an M8 Cam

    How do you remove an M8 cam? Mike shows us how with our M8 Softail strapped to the lift and is prepared to begin the M8 Cam tear down procedures for our S&S cam upgrade. The complete exhaust system and air cleaner assemblies have been removed prior to filming. Mike reminds us of the procedure…

    Watch Now >>
  • 17:47

    Harley M8 Cam Removal Continued

    Mike has the pushrods and the Harley M8 cam cover removed and is ready to move on with disassembly for our S&S cam upgrade. Next in line are the front and rear lifter covers. A 3/16″ Allen is needed to remove the securing hardware. A wobble, or ball Allen will be needed in order to…

    Watch Now >>
  • 41:40

    M8 Oil Pump Upgrade

    Before we get to the M8 oil pump and S&S cam, there are two crucial things that need to be addressed. First, it is vitally important to measure the crankshaft run-out. A dial indicator is needed to take this measurement. For 2007 and later Harley Davidsons, the run-out should not exceed .012″. Twelve thousandths is…

    Watch Now >>